Welcome to The Wet Works - Complete Marine Solutions
 

B&G RF25N Rudder Feedback - 5m cable - MicroC

The RF25N Rudder Feedback Unit with transmission link and five metre NMEA2000 Micro-C cable, is typically used on boats with inboard engines, on larger vessels, and in special applications where Virtual Rudder Feedback may not be suitable.

It connects to a rudder via a mechanical linkage and continuously reports actual rudder position to an autopilot computer - allowing the Simrad Continuum steering algorithm to make the best-informed steering decisions possible.

The RF25N connects directly to a boat’s NMEA 2000® network, simplifying the cabling required for installation. It can be horizontally, vertically or upside-down mounted.

Specs:

• Material: Arnite T06 200 PBT

• Safe distance to compass: 1.0m (3.1 ft)

• Mounting: Horizontal, vertical, or upside down

• Supply and interface: 8-16V via Micro-C

• Power consumption: 0.4W

• Network load factor (NL): 1

• Moro-C ports (input/output): 1

• Cable supplied: 5m (16ft) Micro-C cable with connector

• Rudder angle: ±120 degrees

• Output signal: NMEA2000 PGN127245

• Accuracy: ±0.25° within ±5°, otherwise ±0.5°

• Repeatability: ±0.1°

• NMEA compliant

• Transmitter link: Stainless 345mm (13.6") with 2 ball joints.

NOTE: Ball joint stud for rudder arm requires 4.2mm diameter hole and 5mm tap.

Key Features

IP56 protection


Horizontal, vertical, or upside-down mounting


Supplied with 5-metre (16ft) Micro-C cable with connector


±120 degrees rudder angle


Precise and accurate to ±0.5°


SimNet / NMEA 2000® connectivity

Specification

Cables Included 5m (16ft) Micro-C cable with connector
Mounting [Filter] Vertical Mount|Horizontal Mount
Brand Navico
Voltage 12V - 16V via CAN
Approvals NMEA compliant
Height 65mm
Width 99mm
Depth 177mm
Consumption 40mA from CAN (typical and max.)
Temperature Range Operating: -25 to +55°C (-13 to +131°F) / Storage: -30 to +70°C (-22 to +158°F)
Angle ±120 degrees
Protection Rating IPX6
Warranty 2 Years

Continue Shopping or Checkout