Welcome to The Wet Works - Complete Marine Solutions

Whale Bilge IC Remote Mounted Bilge System 12 & 24v

Whale Bilge IC is a new innovation in bilge water management. The pre-wired, remote mounted Bilge IC kit with intelligent control built in is an easy to install and hassle free complete bilge system. Instead of four separate components in the bilge system Bilge IC is a single kit including a high capacity Gulper IC and Strainer IC.

Strainer IC is a low profile strainer with a built in non-return valve and electronic control switch to fit into confined spaces. Gulper IC self-primes, can run dry and has an on/off delay to prevent cycling. Strainer IC receives signals from Gulper IC and automatically turns off and on when water is in the bilge.

Bilge IC is a remote mounted automatic bilge kit that can be installed up to 4m away from the bilge area meaning it is easy to inspect. Based on Whale’s long running Gulper Range, the self-priming diaphragm pump can handle a variety of debris and run dry without damage. The Strainer IC fits into confined spaces and the multi-orientation outlet port changes to suit installation. The Gulper IC and Strainer IC are connected by pre-wired waterproof electric connectors that prevent damage from capillary action and electrolysis. The Bilge IC is available in 12 V d.c. and 24 V d.c. models.

Dimensions, Weights & Techy Bits
  • Open Flow Rate : 1300 US GPH (82 ltrs/min)
  • Flow Rate @ 1 m Head : 1100 US GPH (65 litres/min)
  • Nominal Voltage : 12 V DC & 24 V DC
  • Voltage Range: 12v: 10v - 13.6 V d.c, 24v: 21.6 to 27.2 
  • Recommended Automotive Fuse Size: 12v 10Amp, 24v 5 Amp
  • Current Draw on Standby:  : Lower power 0.01 Amps supply
  • Minimum Wire Size  : 1.5mm (16 AWG)
  • Cable Length: 4m (12ft)
  • Weight: 2.6 kg (6.5 lbs)
  • Maximum Suction Lift: 3m (10ft)
  • Maximum Discharge Head: 3m (10ft)
  • Lift/head Combined: 4m (12ft)
  • Hose Connectors : Gulper IC Barbed connections, 3/4" (19mm) or 1" (25mm) Strainer IC - 3/4" (19mm)
  • Port Orientation: Horizontal (Easily changed to vertical)
  • Connectors: IP68, Waterproof Quick Connect 7 way (directly onto Gulper IC)
  • Materials : Pump Head : Glass filled Nylon, Valves: Nitrile, Diaphragm: Santoprene
  • Run On Time: 45 seconds
  • Dimensions: See attached image
  • Bilge IC 12v
  • Bilge IC 24v


Continue Shopping or Checkout

Related Items